Delivery
Every ADVANCE harness must be checked by the authorized dealer before delivery to ensure that the scope of delivery is complete and that the basic settings are correct.
Register your new ADVANCE product in your MyADVANCE account no later than 10 days after purchase to benefit from the extended ADVANCE warranty. More information under Warranty.
Delivery includes
- Harness incl. carabiners
- Accelerator incl. Step-in-Aid
- Storage bag
- Getting Started Booklet
Options
- Inflatable protector incl. FLOWBAG
- ZIP Light front container
Adjusting the harness
Video Tutorial
Basic settings
Adjusting the shoulder straps
Loosen the lark's head on the white loop (A) and knot the red line at the desired position. Finally, retighten the lark's head and ensure the setting is symmetrical.
Choose your leg position
You can choose between two positions: (B)
- Adjuster closed (basic setting): for a dampened, smoother flight feel and maximum comfort.
- Adjuster open: for more agility and freedom of movement.
Preparing the accelerator
General info
The speed system is already fitted and only needs to be adjusted for length.
- Make sure that the speed lines run freely through all their low-friction-rings on the harness.
- Connect the speed lines to the risers by Brummel hooks or anchor hitches.
- Make sure that your final setting allows the full travel of the speed system to be used.
Position the accelerator
You can prepare the accelerator in two ways before take-off:
- With Step-In-Aid: Connect the speed bar to one of your shoes for easy access in flight. (1)
- Holder: Attach it to the harness so that it does not interfere with your take-off. (2)
The speed lines can be fixed with the stoppers so that they do not interfere with yourtake-off. (3)
